What is a Metal Roofing Contractor or Specialist?

A Metal Roofing Contractor supplies and installs metal roofing sheets (Colorbond or similar), roof flashings, ridge capping, and all associated waterproofing and edge protection items. They ensure your home is structurally weatherproof and compliant with wind load and rainwater drainage requirements.


The Metal Roofing Contractor will manage the supply and install of your first floor and lower roof. This work happens once the frame is complete and external scaffold access is ready.

What does a Metal Roofing Contractor do?

Typically, they will:

  • Measure and order roofing sheets and flashings to suit your roof structure
  • Supply all fixings, underlays, sarking, and flashings
  • Install roof sheets to pitch, fall, and manufacturer specifications
  • Install perimeter flashings, valleys, ridge caps, and gable ends
  • Seal around all penetrations (e.g., flues, vents, skylights)


Some roofing contractors can also coordinate certification for compliance if your certifier requires it.

Tip: Ask Your Roofer About Delivery and Installation Sequencing

Ask your roofer about delivery coordination — roofing sheets longer than 6 metres often need special access or cranes!


And confirm the order of installation: roof flashings must be installed in sequence with wall flashings and cladding to avoid future water ingress issues.

What to look for in a Metal Roofing Contractor

When reviewing quotes, look for:

  • Scope clearly including all roofing, flashings, and underlay
  • Material brand and warranty periods (e.g., Colorbond, Zincalume)
  • Edge protection or scaffold requirements outlined
  • Timeline that fits your frame completion program
  • Insurances and licences valid for roofing works


Choosing a roofer familiar with multi-level or staged installs is critical if you have both a First Floor and Lower Roof.

Before You Begin: What You’ll Need Ready

To get quotes, you’ll need:

  • Structural roof plans and section drawings
  • Roof pitch angles and drainage layouts
  • Site access details and scaffold plan
  • Target install dates (staged if needed — First Floor then Lower Roof)

Average Timeframe

For this task, Pros typically provide quotes within 7-10 business days.

When Can I Expect Quotes?

Timeframes often vary based on demand and the type of Pro you're engaging (e.g. a plumber). If additional communication or clarification is needed is needed, the quoting process may take longer.

 

Don't be alarmed if you don't receive quotes or communication from any Build Buddy Pros straight away. Some work is more complex and the Pro may need time to comprehend your documents or scope of work. Depending on the job, there may even be some work required by the Pro before they are able to quote (e.g. a site visit might be required).

 

If the average timeframe indicated here has passed, and you have not received any messages or quotes, please feel free to contact the Build Buddy Expert Guidance and Support team for an update on quoting for this task.

Frequently Asked Questions

  • Can the First Floor and Lower Roof be installed at the same time?

    Only if your frame and scaffold allow — usually they are done in stages to maintain safe access.

  • What happens if it rains during install?

    Roofers work around rain, but heavy rain or strong winds can delay installation. Temporary covers can protect framing during gaps.

  • Is sarking or underlay included automatically?

    It should be — but double-check your quote. Roof underlay is essential for condensation management.

How to Complete this Task?

STEP 1

Review and Adjust the Scope of Works

Timeframes may vary based on demand and the type of Pro you're engaging (e.g., a plumber). If additional communication or clarification is needed, the quoting process may take longer.

STEP 2

Confirm Required Documents Are Uploaded

Check that the following required document(s) are uploaded for this task. These are essential to proceed:

STEP 3

Update the Quality Assurance Checklist

Go to the Quality Assurance tab in this task and review the checklist. Edit any details to suit your project requirements. Being clear and upfront helps set expectations with the Pro. Updating the checklist before requesting quotes ensures everyone is aligned.

STEP 4

Request Quotes

Click the orange ‘Request Quotes’ button to start the quoting process.

STEP 5

Review the Quotes

Once you receive quotes:

  • Review each one carefully, including the payment schedule and any special terms
  • Download attached quote documents for detailed review
  • Check each Pro’s profile and read past client reviews

STEP 6

Communicate with the Pro

If needed, message or call the Pro to clarify details or negotiate terms.

STEP 7

Accept a Quote

Choose the quote that best suits your needs. Once you accept a quote, any other pending quotes will be automatically declined. An agreement will automatically be generated.

STEP 8

Complete the Tasks In Your App

New tasks will appear to guide you through this job — follow each step carefully. Make sure to use the Quality Assurance Checklist, and refer to your contract and final Scope of Works whenever needed.

NEED HELP?

Reach Out to Your Build Buddy Pro

If you have any questions or need a hand, your Build Buddy Pro is your best first contact. They’re a licensed expert in their field and can understand the ins and outs of your project. You can message them via the platform, or you can call them directly.


If you have already contacted your Build Buddy Pro and still need further assistance, the Build Buddy Expert Guidance and Support team are here to help. They will be able to guide you on your next steps or help you find answers to any questions you may have.